Kool Karz Playground KKLB-020, Installation And Operating Instructions Manual

Page: 10 / 17

① ①
A
S S
M M
F
③ ③
Step 4: Install the wheel
1. Install the G (wheel) onto the ③ (real axle), put the ① (M8 gasket) , then use the
L (M8 spanner) to ghten the ② (M8 nut ) in clockwise direc on. Finally install
the H (wheel cover) on correct posi on (align and press the buckle of the wheel
cap with the grooves of the wheel to fix it)
2. The front wheel is also installed in this way.
Step 5: Install the steering wheel
Connect S, M terminal firstly, then align the correct position and press A
(steering wheel) on
① (steering yoke) as shown in figure.
P.S if need to take off the steering wheel, please tighten ③ , then pull out the
steering wheel, and disconnect the terminal S,M.
Step 6: Install the
wind deflector
Place F (wind deflector)
onto the corresponding 3
clasp at car body as
shown in figure.
C 2
C1
I
①
X
1
2
3
②
Step 7: connect the
power
Put the I (seat) onto the
right place, fix the two
hooks (at the back of the
seat) into the
corresponding groove on
car body. then fix the N
(seat) with 2 pcs X (self-
tapping screw) as shown
in figure.
Step 8: Install the
seat
Install the C1 (rear view
mirror L), C1 (rear view
mirror R) to the car in
correct placement as
show in figure.
Step 9: Install the
rear view mirror
4
First connect the terminal
1 and 2 . then connect the
power port 3 and 4 .
2 1
4
3