9
INSTRUCTIONS FOR USE
UNIT
REMOTE
FUNCTION
1. Turn the heater ON by pressing the ON/OFF button.
NOTE:
power is OFF,
heating element will stop working.
an will continue for 30 seconds until
heater has cooled
.
2. Press the M
button to select between
an and eat modes.
1. Pla
surface.
2. Pull out the insula
compartment as shown below.
Turn on the power switch at the back of the unit
With the power in the OFF position, plug the unit directly
into a 120 VAC electrical outlet.
Battery Cover
Insulating Film
Insulating Film
Modes
Fan
REMOTE
N
Low
LOW HEAT ode uses 1, 000 W.
High
HIGH EAT ode uses 1 500 W.
F
PULL
STARTING THE UNIT AND SELECTING THE HEAT MODE
Remote Control
the remote control battery
