It is normal for the heater to cycle ON and OFF as it maintains
the preset temperature. To prevent the unit from cycling, you
need to change the thermostat setting.
NOTICE
NOTICE
may be present. This is normal and should not occur again unless
the heater is not used for an extended period of time.
4.
1. Place the product on a firm , level surface.
2. Plug the unit directly into a 120 V AC electrical outlet.
3. Rotate the POWER KNOB clockwise to select
between (fan only),
(low heat) or
(high heat).
LOW position operates the heater at 750 watts conserving
energy and HIGH position operates the heater at a maxium
I
II
1500 watts.
Turn the THERMOSTAT KNOB clockwise to the highest
setting.
5. When the room reaches a comfortable temperature,
slowly turn the THERMOSTAT KNOB counter-clockwise
until the heating element clicks OFF
.
6. This is the point at which the Thermostat setting equals
the room temperature. At this setting, the Thermostat will
automatically turn the heater ON and OFF to maintain the
selected temperature.
7. Turn the POWER KNOB to OFF and unplug the heater
whe
ished using.
0
I II
POWER
KNOB
THERMOSTAT
KNOB
Temperature Control
Power Light