Shenzhen Konvision Technology Co,.Ltd
www.konvision.com
48
To do factory reset, please follow the below five steps:
1. Press MENU button to enter main menu.
2. Turn VOLUME knob to item Setup and select it.
3. Turn IMAGE ADJ knob to Factory Reset and select it.
4. The screen will refresh after following the instruction of turning the VOLUME knob.
5. Power off the monitor, and must wait for at least 5 seconds, then restart the monitor.
The monitor resets to factory preset.
Remote Control
Remote control the monitor through Ethernet:
1. Connected with monitor via LAN, and you can achieve remote controlling by software
“Konvision Device Controller”.(Network remote control software and instructions please
contact with the dealer)
2. The LAN cable should be parallel connection for both two ends, for example 568B LAN
cable, with pin definition:
orange-white, orange, green-white, blue, blue-white, green, brown-white, brown.
