Step Three- Install new bearing
in Counter Bearing Support
•
The counter bearing support on the motor side is
used on both the 550SX and 600SX models. The only
difference is the 550SX has a bearing with a 5mm ID
and the 600SX has a bearing with a 6mm ID. Since
the powerful Pyro 650-103L has a 6mm motor shaft,
the appropriate bearing must be installed.
•
Carefully press the existing bearing out of MIK4714.
This is easily accomplished with a simple vice and
correctly sized socket. Of course if you have an
Arbor Press, this is more precise for installation and
removal.
