Kontron SMARC-sAMX8X User Manual Download Page 3

SMARC-sAMX8X – Rev. 1.1 

www.kontron.com 

 

// 3 

 

 

 

SMARC-SAMX8X - USER GUIDE  

 

 

 

Disclaimer

 

 

Kontron  would like to point out that the information contained in this manual may be subject to alteration, 
particularly as a result of the constant upgrading of Kontron products. This document does not entail any guarantee 
on the part of Kontron with respect to technical processes described in the manual or any product characteristics 
set out in the manual. Kontron assumes no responsibility or liability for the use of the described product(s), conveys 
no license or title under any patent, copyright or mask work rights to these products and makes no representations 
or warranties that these products are free from patent, copyright or mask work right infringement unless otherwise 
specified. Applications that are described in this manual are for illustration purposes only. Kontron makes no 
representation or warranty that such application will be suitable for the specified use without further testing or 
modification. Kontron expressly informs the user that this manual only contains a general description of processes 
and instructions which may not be applicable in every individual case. In cases of doubt, please contact Kontron. 

This manual is protected by copyright. All rights are reserved by Kontron.  No part of this document may be 
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer 
language, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the 
express written permission of Kontron.  Kontron  points out that the information contained in this manual is 
constantly being updated in line with the technical alterations and improvements made by Kontron to the products 
and thus this manual only reflects the technical status of the products by Kontron at the time of publishing. 

Brand and product names are trademarks or registered trademarks of their respective owners. 

©2020 by Kontron S

&

T AG 

 

Kontron S

&

T AG 

Lise-Meitner-Str. 3-5 
86156 Augsburg 
Germany 
www.kontron.com 

 

 

 

Summary of Contents for SMARC-sAMX8X



















































Reviews: