Kontron RMX-1U15L, User Manual, Page: 34 / 73

1-10
RMX-1U15L and RMX-9U15L User’s Guide
marked rack mounting holes and install a 10-32 screw intothe top and bottom holes
with a flat head screwdriver (Figure 1-5).
Figure 1-5. Mounting Slide Rail to Back of Rack
5) From the front side of the rack, mount the other end of the slide rails to the rack with
the slide rail’s
ear
behind the rack mounting flange.
Line up the slide rail screw holes
with the marked rack mounting holes and install a 10-32 screw intothe top and bottom
holes with a flat head screwdriver. Position one 10-32 nut behind each screw
(Figure 1-6).
Figure 1-6. Mounting Slide Rail to Front of Rack
6) Hold the RMX-1U15L(/RT) firmly with the handle towards you and the screen facing the
floor. Position both the left and right sides of the inner rail, attached to the monitor, in
between the outside rails, mounted to the rack.