Main Memory 3-7
PCI-953 Single Board Computer User’s Guide
System In
stallation
To add a DIMM card to the single board computer, follow these steps:
1) Move the module release levers on the single board computer (one on each end of the
socket) outward, away from the socket (Figure 3-4).
2) Place the DIMM card so that the two notches on the contact edge line up with the two
alignment nodes in the DIMM socket. Insert the DIMM card into the socket.
Figure 3-4. DIMM Installation
3) Using both hands, press downward and guide the DIMM card into the socket until it
snaps into place. The module release levers will return to their upright position when
the DIMM card is completely seated in the socket. The pegs on the tips of the release
levers should align with the notches on both ends of the DIMM card.
Notched ends
of memory
module
Module
release
levers
Dual Inline Memory Module (DIMM)
Summary of Contents for PCI-953
