Kontron PCI-755, User Manual

Page: 37 / 94

Hardware
Settings
Overview 2-3 PCI-755 User’s Guide
³
Overview
This chapter provides the definitions and locations of jumpers, headers, and connectors.
³
Jumpers
The PCI-755 has several jumpers which must be properly configured to ensure correct operation.)
Figure 2-1. Jumper Connector
For a three-pin jumper (see Figure 2-1), the jumper setting is designated “1-2” when the jumper connects pins 1 and 2.
The jumper setting is designated “2-3” when pins 2 and 3 are connected and so on. You will see that one of the lines
surrounding a jumper pin is thick, which indicates pin No.1.
To move a jumper from one position to another, use needle-nose pliers or tweezers to pull the pin cap off the pins and
move it to the desired position.