manualshive.com logo in svg

Kontron PC/104-PCMCIA-1, User Manual

Share
Download
Kontron PC/104-PCMCIA-1 User Manual Download Page 7

Kontron

PC/104-PCMCIA-1 User’s Guide

User Information

3

1.6 

Technical Support

Technicians and engineers from Kontron Embedded Modules and/or its subsidiaries and

official distributors are available for technical support. We are committed to making our
product easy to use and will help you use our products in your systems.

Before contacting Kontron Embedded Modules technical support, please contact your local

representative or consult our Web site for the latest product documentation, utilities, and
drivers. If the information does not help to solve the problem, contact us by telephone. 

Asia

Europe

North/South America

Kontron Asia

Kontron Embedded Modules

Kontron America

5F-1, 341, Sec 4

Chung Hsiao E. Road

Taipei, Taiwan

Brunnwiesenstr. 16

94469 Deggendorf – Germany

3988 Trust Way

Hayward, CA 94545

Tel: +886 2 2751

7192

Tel: +49 (0) 991-37024-0

Tel: 510-732-6900

Fax: +886 2 2772

0314

Fax: +49 (0) 991-37024-104

Fax: 510-732-7655

Summary of Contents for PC/104-PCMCIA-1





















Reviews:

No comments

Brands by name

Popular brands

Load more brands