Kontron IP Network Server NSC2U
December 2009
Product Guide, rev. 1.4
51
Optional Component Installations—NSC2U Server
4.2
Installing or Replacing a PCI Add-in Card
The IP Network Server NSC2U is delivered with a riser card assembly that includes the
following two riser cards:
• A combination PCI-X*/PCI Express* (PCIe*) riser card for full-height add-in cards.
• A PCIe riser card with two slots for low-profile add-in cards
The riser card assembly is attached to the T5000PAL server board with two separate
connectors in the middle of the server board. (See
for these locations.)
Note:
PCI-X/PCI Express add-in cards are referred to generically as an “add-in card” in the
following procedures.
Figure 33.
NSC2U Server System Cable Routing
