KTD-N0793-0
Page 48
KTGM45 Users Guide
3.14
Clear CMOS Jumper (J13)
The Clr-CMOS Jumper is used to clear the CMOS content.
J12
J13
pin1-2
pin2-3
pin1-2
pin2-3 Description
D
X
Default positions
D
X
Clear CMOS data *
D
Secure CMOS function is disabled and Default values are used
X
D
Illegal position *
WARNING
: Don’t leave the jumper in this position, otherwise if power is disconnected the battery will fully
depleted within a few weeks.
Note
: The J12 connector might be removed in the future.
To clear CMOS settings, including Password protection, move the Clear CMOS jumper to pin 2-3 for a few
seconds (~10 sec) (works with or without power connected to the system).
KTGM45/mITX
KTGM45/Flex
J12 J13
J12 J13
Connector Definitions
