KTQM77/mITX Users Guide
KTD-N0850-B Page 11
Video
Intel ® i3, i5 & i7 3
rd
Generation Mobile processors support Intel ® HD Graphics 4000.
eDP (Embedded DisplayPort) directly from processor.
Analogue VGA and digital display ports (DVI, 2x DP, LVDS) via the Mobile Intel ®
QM77 Chipset.
•
VGA (analogue panel) via DVI-I (sharing DVI-I connector with DVI-D)
•
DVI-D (sharing DVI-I connector with analogue VGA)
•
2x DP (DisplayPorts), comply with DisplayPort 1.2 specification.
•
LVDS panel support up to 24 bit, 2 pixels/clock and 1920x1200.
•
HDMI panel support via DP to HDMI Adapter Converter.
•
Second VGA panel support via DP to VGA Adapter Converter.
•
Second DVI panel support via DP to DVI Adapter Converter.
•
Dual independent pipes for Mirror and Dual independent display support
(exception is combination LVDS and eDP)
•
Triple independent pipes for triple independent or cloned displays are supported
from OS. Any 3 displays via DP0, DP1, DVI-D or DVI-A, LVDS or eDP can be
used, but only active DP to DVI/HDMI converters can be used.
I/O Control
Via ITE IT8516E Embedded Controller and Nuvoton W83627DHG I/O Controller (both
via LPC Bus interface)
Peripheral
interfaces
•
Two USB 2.0 ports on I/O area
•
Four USB 3.0 / USB 2.0 on I/O area
•
Eight USB 2.0 ports on internal pinrows
•
Two IEEE 1394a-2000 (up to 400M bits/s) on internal pinrows
•
Four Serial ports (RS232) on internal pinrows
•
Two Serial ATA-600 IDE interfaces
•
Four Serial ATA-300 IDE interfaces
•
RAID 0/1/5/10 support
•
mSATA via mPCIe_0 connector
•
PS/2 keyboard and mouse ports via pinrow
LAN
Support
•
1x 10/100/1000Mbits/s LAN (ETHER1) using Intel® Lewisville 82579LM Gigabit
PHY connected to QM77 supporting AMT 7.0
•
2x 10/100/1000Mbits/s LAN (ETHER2/ETHER3)using Intel® Hartwell 82574L PCI
Express controllers
•
PXE Netboot supported.
•
Wake On LAN (WOL) supported
Expansion
Capabilities
•
PCI-Express slot(s) (PCIe 2.0):
o
1 slot PCIe x16
o
1 slot PCIe x1
o
1 slot miniPCI-Express (PCI Express or mSATA signals, no USB signals)
o
1 slot miniPCI-Express (PCI Express signals, no mSATA or USB signals)
•
SMBus, compatible with ACCES BUS and I2C BUS, (via Feature connector)
•
SPI bus routed to SPI connector
•
DDC Bus routed to DVI-I connector
•
18 x GPIOs (General Purpose I/Os), (via Feature connector)
•
DAC, ADC, PWM and TIMER (Multiplexed), (via Feature connector)
•
WAKE UP / Interrupt Inputs (Multiplexed), (via Feature connector)
•
3 Wire Bus for GPIO Expansion (up to 152 GPIOs), (via Feature connector)
•
8 bit Timer output, (via Feature connector)
System Specification
