Getting Started
KT-RT-BT User’s Manual Version 1.0
www.kontron.com
24
04.08. Using the Stylus
Following the information below when using a stylus:
Use only the included stylus to touch the screen. Do not place any objects on its surface and
do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g.,
nails, pencils and ball point pens).
Use the stylus only for touching the screen. Using it for any other purpose may damage the
stylus and result in scratches on the screen.
The pointer cannot follow the stylus movement if you move the stylus too quickly.
To make a selection, tap the screen once with the stylus. To double-click, tap twice without
pausing. To do a right-click, tap the screen once and hold the tip of the stylus on the screen, the
right-click icon appears.
04.09. Removing the Protective Film from the Display
The front display of the KT-RT-BT is protected during transport by a transparent film. This film
should remain on the front display during assembly to avoid damage to the front display surface.
Only remove the film once all of the assembly work has been completed.
fn
f1
f2
fn
Figure 21. Removing the Protective Film