KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 40
Figure 27: Releasing the Cover
5.
Lift the cover up (on the rear edge) and remove the cover as shown in Figure 28.
Figure 28: Removing the Cover
6.
To close and secure the cover, proceed in the reverse order (step 5 to step 2).
The KISS 4U V3 SKX is only properly closed when the cover is attached properly and the
cover’s knurled screws fastened:
•
Cover fastening screw (Figure 25) on the front side
•
Two Knurled screws (Figure 26) on the rear side
