manualshive.com logo in svg

Kontron KFM19_e, User Manual

Share
Download
Kontron KFM19_e User Manual Download Page 2

 Contents 

19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 

1 

Contents 

Introduction.......................................................................................................... 3

 

Symbols used in this Manual ................................................................................. 4

 

Important Instructions......................................................................................... 5

 

Note on the Warranty............................................................................................. 5

 

Exclusion of Accident Liability Obligation............................................................... 5

 

Liability Limitation / Exemption from the Warranty Obligation ................................ 5

 

Safety Instructions .............................................................................................. 6

 

FCC Statement ...................................................................................................... 8

 

Electromagnetic Compatibility................................................................................ 8

 

Scope of Delivery................................................................................................. 9

 

Optional Parts ........................................................................................................ 9

 

Type Labels and Product Identification.................................................................. 9

 

Product Description .......................................................................................... 10

 

Front Panel .......................................................................................................... 11

 

Display ............................................................................................................ 12

 

Display with Touchscreen ............................................................................... 12

 

Controls and LED Indicator ............................................................................. 13

 

Left Side .............................................................................................................. 15

 

Interfaces ........................................................................................................ 16

 

Power Plug...................................................................................................... 17

 

Rear Side............................................................................................................. 18

 

Air Openings ........................................................................................................ 19

 

On Screen Display (OSD).................................................................................... 20

 

Operation of the OSD Menu............................................................................ 20

 

Power Supply ...................................................................................................... 21

 

Power Cord Connection....................................................................................... 21

 

AC Connection ................................................................................................ 22

 

DC Connection................................................................................................ 23

 

Installation Instructions .................................................................................... 25

 

Instruction for Mounting ....................................................................................... 25

 

Panelmount Version ............................................................................................ 26

 

Rackmount Version ............................................................................................. 26

 

Summary of Contents for KFM19_e












































Reviews:

No comments

Brands by name

Popular brands

Load more brands