KTD-S0001-0 Page
13
Graphics
Interface
JRex
plus
LX
User's Guide
7.2
Flat Panel Connectors
The LVDS interface for the flat panel is available through the X18 connector (30 pins) on the bottom side of
the board. The implementation of this subsystem complies with the JILI specification of KONTRON Tech-
nology A/S. Another option for connecting a display to the JRex
plus
LX is a (LV)TTL compatible 18 bit RGB
interface available on X17 (32 pins). A variety of cables for different display types are available from
KONTRON. Please refer to the actual cable list on the KONTRON website for part numbers and cable names.
7.2.1 JILI30
Connector
Header
Pin
Signal Name
Function
1
FTX0-
First channel data output 0 (negative)
2
FTX0+
First channel data output 0 (positive)
3
FTX1-
First channel data output 1 (negative)
4
FTX1+
First channel data output 1 (positive)
5
FTX2-
First channel data output 2 (negative)
6
FTX2+
First channel data output 2 (positive)
7
GND
Ground
8
FTXC-
First channel clock output (negative)
9
FTXC+
First channel clock output (positive)
10
FTX3-
First channel data output 3 (negative)
11
FTX3+
First channel data output 3 (positive)
12
N.C.
Not connected
13
N.C.
Not connected
14
GND
Ground
15
N.C.
Not connected
16
N.C.
Not connected
17
GND
Ground
18
N.C.
Not connected
19
N.C.
Not connected
20
N.C.
Not connected
21
N.C.
Not connected
22
N.C.
Not connected
23
N.C.
Not connected
24
GND
Ground
25
SDA
I2C data line
26
DATAENA
Data enable output
27
SCL
I2C clock line
1
30
28 - 30
VCC
1)
Power +3.3V or +5V
Attention:
The JILI30 interface supports only the VESA FPDI standard.
Summary of Contents for JRexplus LX
Page 1: ...JRexplus LX KTD S0001 0...
