JFLEX-Visualisation1 Product Manual
LCD Interface
Kontron 11
Revision
1.0
7. LCD
INTERFACE
Kontron offers a variety of flat-panel adapters. When using a Kontron adapter:
1. Check whether you have the correct adapter and cable for the panel you plan to
use. Inspect the cable for damages.
2. Disconnect power from your system.
3. Connect the panel adapter to the internal LCD connector (X4) on the JFLEX-
VISUALISATION1.
4. Connect the other end of the cable to your display.
5. Supply power to your system.
6. If no picture appears on your display, connect a CRT monitor to the CRT-
connector (X5).
7. If you get a picture on the CRT monitor, start the “CHIPS Control Panel,” which
you can download from the Kontron Web site, and select “Both” in the
LCD/CRT-Box.
If you still don’t see any improvement, consider contacting the dealer for technical
support.
Note:
To determine whether your panel is supported, check the Kontron Web site for a list of new panels. We
regularly update the list with panels that have been tested with the JFLEX-VISUALISATION1.
