EZ2-VX6060
Equipment Presentation
SD.DT.F65-0e
Page
3
Software
>
Depending on the system Order Code, Linux or VxWorks Operating System has been pre-loaded at the
factory.
See Chapter 2 “Software” page 14 for details on your configuration.
Chassis Form Factor
>
2U four−slot desktop chassis (Height: 88.9 mm − Width: 482.6 mm − Depth: 440.0 mm)
Warranty
>
5+ years of Guaranted Supply
>
10+ years of Hardware and Software Support available
1.4
Receipt of the Equipment
1.4.1
Checking the Packages
Inspecting the packages and verifying their condition is the responsability of the customer and should be carried
out upon delivery.
>
Inspect the packages and check their condition:
4
no broken corners,
4
general state of the case (no rips or holes),
4
condition of the bands and the clips.
>
If you wish to report any damage in transit, you should make out a full report, and also note the damage on
the packing list that accompanies the equipment. Ensure that the report and the packing list are signed by
yourself and also by the transport agent, and send a copy of these documents to:
4
the transport company,
4
Kontron.
1.4.2
Unpacking
Unpacking the equipment must be carried out under the supervision of a technician approved by Kontron.
>
Open the package and take out the items one by one.
Two people should assist in the unpacking of the system unit, as it may be heavy.
>
Inspect each item and make a note of any possible defects (scratches, marks or blemishes, damaged
cables, etc.). If necessary, make a report of any damage or defects.
>
Check the equipment against the packing list and report any missing items.
It is recommended that you keep the package and the anti-shock protection. This will be required if you
decide to move your system or rack to a different site.
