Kontron ETXexpress-WPM, User Manual

Page: 53 / 98

ETXexpress-WPM User’s Guide page 53
IDE Configuration Submenu
Feature Option Description
IDE Configuration
ATA/IDE Configuration Disabled
Compatible
Enhanced
Configure ATA/IDE hard drives.
Configure SATA as IDE
AHCI
8
SATA Port 0, 1, 2, 3
Submenu When entering setup, BIOS auto detects
the presence of IDE devices. This
displays the status of auto detection of
IDE devices.
Type Not Installed
Auto
CD/DVD
ARMD
Select type of device connected to the
system.
LBA/Large Mode Disabled
Auto
Disables LBA Mode.
Auto enable LBA Mode if the device
supports it and the device is not already
formatted with LBA Mode disabled.
Block (Multi-Sector Transfer) Disabled
Auto
Disabled: The data transfer from and to
the device occurs one sector at a time.
Auto: The Data transfer from and to the
device occurs multiple sectors as a time
if the device supports it.
PIO Mode Auto
0,1,2,3,4
Select PIO Mode.
DMA Mode Auto Select DMA Mode
Auto: Auto detected
SWDMAn: SingleWordDMAn
MWDMAn: MultiWordDMAn
UDMAn: UltraDMAn
S.M.A.R.T Auto
Disabled
Enabled
Self-monitoring, Analysis and Reporting
Technology.
32-bit Data Transfer Disabled
Enabled
Enable/Disable 32-bit data transfer.
Hard Disk Write Protect Disabled
Enabled
Disable/Enable device write protection.
This will be effective only if device is
accessed through the BIOS.
IDE Detect Time Out (Sec) 0, 5, 10, 15, 20, 25,
30, 35
Select time out value for detecting
ATA/ATAPI device(s).
Note : In the Option column, bold shows default settings.