4 Resource list and I/O map
Kontron User's Guide DIMM-PC/ETH+COM
10
4
Resource list and I/O map
Typical resource allocations are listed in the table below.
IRQ # Use Available
Comment
5
Ethernet
No
This is the default IRQ for the Ethernet controller; it is available if the Ethernet controller uses
IRQ10, 11, or 12.
The IRQ5 and the IRQ11 are unavailable if you use the DIMM-PC/486-I.
Use the Ethernet controller setup utility to select another interrupt (for example, IRQ10).
10
COM4
No
Available if the serial port is uninitialized.
11
COM3
No
The IRQ11 is unavailable if you use the DIMM-PC/486-I.
I/O Address
Use
Available
Comment
0300 – 030F
Ethernet
No
Selectable I/O address
02E8 – 02EF
COM4
No
I/O address for COM4
03E8 – 03EF
COM3
No
I/O address for COM3
