www.kontron.com
CP6940 User Guide
// 71
When developing applications using the CP6940, the system integrator must be aware of the overall system thermal
requirements. A system chassis must be provided which satisfy these requirements.
Measurements proofed that following conditions (maximum ambient temperature under maximum load) are possible
while all temperatures of on-board components stay below their critical thresholds..
Table 33: Thermal Requirements
Device
Operation mode
Cooling
Maximum Tem-
perature
CP6940-SA-OC-V 24x 1Gbps traffic rear
Front: 4x 1GbBase-T RJ45, 2x 10 Gbe SFP+, 2x 1G SFP
Forced Air > 2m/s
0 to +60°C
CP6940-RA-OC
24x 1Gbps traffic rear
Front: 4x 1GBase-T RJ45, 4x 10G SFP+
Forced Air > 2m/s
-40 to +85°C
CP6940-RA-OC-
P
24x 1Gbps traffic rear
Front: 2x QSFP+ for 40G or 4 times 10G, 4x 10G SFP+,
2x 1G SFP
Forced Air > 2m/s
-40 to +85°C
As Kontron assumes no responsibility for any damage to the CP6940 or other equipment
resulting from overheating any of the components, it is highly recommended that system
integrators as well as end users confirm that the operational environment of the CP6940
complies with the thermal considerations set forth in this document.
