Kontron AT8402, User Manual

Page: 23 / 89

AT8402 Introduction
Page 1 - 9 AT8402 User Guide
General
Vibration Designed to meet or exceed the following:
•
Bellcore GR-63, Section 4.4
•
Operating: 1.0G, 5-500Hz each axis
•
Non-operating: 0.5G, 5-50Hz, 3.0G, 50-500Hz each axis
Shock Designed to meet or exceed the following:
• DIN/IEC 60068-2-27
•
Bellcore GR-63, Section 4.3
•
30G, half-sine 11ms, each axis
Safety Designed to meet or exceed the following:
•
UL 60950, 3rd edition
•
EN 60950
•
LVD 73/23/EEC
• Denan Law
EMC Designed to meet or exceed the following:
•
FCC 47 CFR Part 15, Subpart B
•
EN55022, EN55024
•
EN 300 386
Reliability
•
MTBF: > 176,000 hours @ 40°C/104°F (Telcordia SR-332, Issue 1)
HW Monitoring
LEDs ATCA LEDs:
• 4 LEDs ("Ready for Hot Swap", "Out of Service", "Healthy", "Heart Beat")
Board Management • based on IPMI 1.5
•
FRU Management
•
Sensors (Voltage, Current, Temperature, Fuse)
•
Status and Alerting
•
Hot Swap Management for Base Board and AMC
•
Electronic Keying of Base and Fabric Interfaces and AMC ports
• Local SEL
Table 1-2: AT8402 Main Specifications (Continued)
AT8402 SPECIFICATIONS