786LCD/mITX Family
KTD-00629-K
Public User Manual
Date: 2009-10-13 Page
22 of 77
4.4 Display
Connectors
The 786LCD board family provides onboard two basic types of interfaces to a display: Analog CRT interface
and a digital interface available as either LVDS dual channel interface or DVI (analogue/ digital) depending
on the board configuration. Further an onboard AGP slot supports AGP 2.0 including 4X AGP data transfers.
DVO is not supported in the AGP connector.
4.4.1 CRT Connector (CRT)
Note
Pull
U/D
Ioh/Iol
Type
Signal
PIN
Signal
Type
Ioh/Iol
Pull
U/D
Note
6 ANA-GND
PWR
-
-
/75R
*
A0
RED 1
11
NC
-
-
-
7 ANA-GND
PWR
-
-
/75R
*
A0
GREEN 2
12
DDCDAT
IO
TBD
560R
8 ANA-GND
PWR
-
-
/75R
*
A0
BLUE 3
13
HSYNC
O
TBD
9
5V
PWR
-
-
1
-
-
-
NC 4
14
VSYNC
O
TBD
10
DIG-GND PWR
-
-
-
-
PWR
DIG-GND 5 15
DDCCLK
IO
TBD
560R
Note 1:
The 5V supply in the CRT connector is fused by a 1.1A reset-able fuse.
Signal Description - CRT Connector:
Signal
Description
HSYNC
CRT horizontal synchronization output.
VSYNC
CRT vertical synchronization output.
DDCCLK
Display Data Channel Clock. Used as clock signal to/from monitors with DDC interface.
DDCDAT
Display Data Channel Data. Used as data signal to/from monitors with DDC interface.
RED
Analog output carrying the red color signal to the CRT. For 75 Ohm cable impedance.
GREEN
Analog output carrying the green color signal to the CRT. For 75 Ohm cable impedance.
BLUE
Analog output carrying the blue color signal to the CRT. For 75 Ohm cable impedance.
DIG-GND
Ground reference for HSYNC and VSYNC.
ANA-GND
Ground reference for RED, GREEN, and BLUE.
