Konrow K-TAB702X, User Manual, Page: 33 / 108

EN
2. Inserting a SIM card
4. Charging the battery
The K-TAB 702X tablet integrates dual SIM card which enables
you to use two lines on the same tablet. Your K-TAB 702X has
two SIM ports. To insert the SIM card(s):
• Switch off the tablet and remove SIM/SD cards shall.
• Insert the SIM card correctly into the relevant card slot
(N°8 - see figure below ).
• Remit the SIM/SD cards shell and restart the K-TAB 702X.
CAUTION: The 3G function can only be used on one SIM card.
3. Inserting a MicroSD
It is possible to increase the internal memory of the K-TAB 702
xdevice with a MicroSD card. (maximum 32GB MicroSD card).
• Switch off the tablet and remove SIM/SD cards shell.
• Insert the memory card into the relevant slot.
• Remit the SIM/SD cards shell and restart the K-TAB 702X.
CAUTION: Inserting or removing a SIM card or a MicroSD card
requires the tablet to be completely switched off.
Charging the battery:
• To charge the battery, connect the USB cable (supplied) to
the USB port of your tablet and the other end to the charger
adaptor (supplied). Then connect the charger adaptor to a
power outlet.
• The battery charge icon illuminates during charging and
indicates the charge status.
• When the battery is fully charged, you can disconnect the
USB cable from the device then from the power outlet.
IMPORTANT:
• The tablet is recharged only via its USB port.
• Ensure your tablet is fully discharged before charging it
for the first time.
• The battery must be charged for at least 5 to 8 hours when
first charged.
Note: You can use the device when it is being charged. In this
case, the battery may take longer to charge fully.