www.ks-power.de/en
|
2
1.
Short circuit protection.
The charger will automatically power off if the terminals
are short-circuited.
2.
Overtemperature protection.
The charger powers off in two situations, as de
-
scribed below, and automatically enters the charging mode when the operating tem-
perature is restored:
a). When the charger has been exposed to high temperatures for a long time;
b). When the temperature inside the charger exceeds the operating temperature.
3.
Spark protection.
The terminals are not energized until the battery is connected.
Use the correct charging voltage according to
the battery’s rated voltage! Do not charge the
battery when the engine is running!
WARNING!
3
SAFETY FUNCTIONS
1. Power indicator
1. Power indicator
2. Fault indicator
2. Fault indicator
3. Mode selection button
3. Mode selection button
4. 6 V indicator
4. 6 V indicator
5.
5. 12 V
12 V indicator
indicator
1
1
5
5
2
2
3
3
4
4
2.Press the MODE button to select the appropriate charging voltage that matches the
battery’s rated voltage: select 6 V charging voltage for a 6 V battery and 12 V charging
voltage for a 12 V battery. The selected mode will turn green.
3.The charger will automatically enter the charging mode. If the voltage at the battery
terminals is more than 2 V, the power indicator will flash green. If the voltage is less than
2 V, the charging process will not start.
4.When the battery is fully charged, the charger will automatically enter trickle charge
mode and the power indicator will light up green.
5.Before disconnecting the battery, unplug the charger from the mains supply and then
remove the terminals from the battery.
6.If the battery is faulty, the fault indicator will go on.
