9
TRADITIONELLE DEUTSCHE QUALITAT
· ·
OPERATION
STARTING THE ENGINE
To start the engine turn the device into the socket, press with a finger of one hand
the lock button to lock, another should press the lever of inclusion. Release the lock
button when the engine starts.
The engine stops when you release the lever of inclusion.
!
!
IMPORTANT!
b
a
ADVICE
For greater security, turn on the motor of a device only once you deliver it to the
place of operation. Adjust the height of the wheels. Watch the electric current
cable - it should always be behind you. Hold the tiller with two arms.
The device moves forward due to the action of mills that are slowly sinking into
the ground. If you need to perform deep tillage, would be efficient to move the
tiller forward to a distance of outstretched hands, and then back to yourself. You
can repeat the action until the required level of cultivation is achieved.
Make sure that the mills are working at top speed, but do not let overload. If the
mills are too deeply dipped into the soil, gently shake the device from side to side
and slow their release.
Use the following routes for preparation the ground for planting.
Make sure engine of the tiller is turned off
before performing work!
!
!
ATTENTION - DANGER!
Clutch
Control Rod
Button
of blocking
