Konig MP4-PLAY20-2GB, Manual

Page: 2 / 120

1
1. Connecting to a PC and downloading audio files
This player is plug & play for Windows 2000/XP/ME. For Windows 98 and 98SE you have to install a
driver before connecting (See “Driver Installation” section for details).
(1) Plug the USB cable to the USB port of the PC, and plug the smaller end of the cable into the
USB port of the player.
(2) When the “ ” icon appears at the right bottom of the taskbar, double click “My Computer” on
the desktop, you see a removable disk which indicates the player. Just use the removable disk
as a regular local disk, copying files from or to it.
Removing the player from the PC safely:
For Windows 2000/XP:
(1) Left click the “
” icon at the right hand corner of the taskbar.
(2) Click the pop-up mini-window with the message “Stop the USB Mass Storage Device – Drive
(X)”.
(3) When you are prompted to remove the device, pull out the player’s USB plug from the PC.
For Windows 98, please make sure the data transfer is completed before unplugging the MP3
player.
2. Charge the battery
The device has a built-in lithium-icon rechargeable battery. It is charged via USB connection. It takes
about 3 hours to fully charge the battery. To charge the battery, connect the USB cable to the PC,
and connect the other smaller end of the USB cable to the USB interface of the player.
The device is now connected to the PC and being charged. If you want to know the charging progress,
disconnect the device safely by clicking the “
” icon. You see an animating battery icon indicating
charging progress. When the icon becomes green, the battery is fully charged.
Notice:
a.
The device is not available during charging.
b. For maximum performance, lithium-ion batteries need to be used often. If you don’t use the
device often, be sure to recharge the battery at least once per month.