Safety instructions
Lay the hand that is not operating the desk on the table top „two
-
handed
operation”.
Make sure that no
-
one is at or under the desk when lifting and lowering.
During lowering make sure that no objects such as waste bins or pedestals
become wedged under the desk.
As soon as the electronic collision protection has stopped the electric height
-
adjustable desk from moving, you can then only adjust the desktop in the opposi-
te direction (the safety feature initially prevents you from adjusting the desk in the
same direction as triggered it).
To prevent the risk of crushing and shearing, the desk and all of its moving parts
(incl. attachments and accessories) must have a clearance of at least 25 mm to
adjacent objects.
When lowering past the programmed safety stop, note that a pinch point can
arise between the desk top frame, cable tray and the motor strut.
Caution! Desks are more liable to tipping in the highest position than in the lower
ones.
The max. permissible net load is 80 kg.
The desk is not suitable for transporting people.
This device can be used by children aged 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the safe
use of the device and when they understand the potential risks.
Do not let children play with the device.
Cleaning and user maintenance must not be performed by children without su-
pervision.
The lifting system is designed for short
-
term operation with a maximum permitted
operating time of 10%, approx. 2 minutes; i.e. after one minute’s operating time,
an 18
-
minute break is required.
Please note that the lifting system has a circuit breaker that switches off the sys
-
tem in the event of an overload.
The manufacturer is not liable for damages resulting from improper use.
55
Summary of Contents for TALO.S Bench
Page 2: ......
Page 4: ...1...
Page 30: ...27 EG Konformit tserkl rung...
Page 33: ...30...
