12
Assembly instructions
INSIDE.60 room partitioning system
These assembly instructions contain all the information needed to assemble and reconfigure the
INSIDE.60 partitioning system. The individual steps are numbered as required, and the different
tool sizes are stated.
Tools required:
Allen key SW 3 / 4 / 5
2
3
1
1
4
4
3
1
1
2
2
3
3
1.
Linear connection between
two screens
Position linear connectors
➀
in
the gap between the screens,
one at the top, one at the
bottom.
At the same time, push in the
lugs on the side of the linear
connector
➁
and clip the
connector into the gap between
the two screens.
Pushing back the lugs will
ensure that the screens are
securely joined together
➂
(no tools required).
Clip the end trim
➃
into the gap
if no further connection is
needed.
To take the screens apart,
release the lugs and lift the
screens
2.
Corner connection
L-configuration 90°
Clip the corner connector
➀
into
the gap between the screens.
A stabilising bracket can be
fitted if required, see Fig. 9.
Guide the screens with corner
connectors into the connection
nodes
➁
of the link rod from
above.
Clip the top and side trims
➂
onto the connection node.
Summary of Contents for INSIDE.60
Page 2: ...Inhalt Seite 1 9 Deutsch Contents Page 11 19 English...
Page 12: ...10...
