
5
MENU:
TITLE SETUP
DATE/TIME
DECODER SETUP
SENSITIVITY
EVENT LIST
AUTO SEQUENCE
OTHER
ENTER: MENU KEY
EXIT: ESC KEY
DATE/TIME:
DATE
:
17-06-10
TIME
:
08:59:35
DATE/TIME:
DD/MM/YY
EXIT: ESC KEY
3) DECODER SETUP:
In DECODER SETUP you can adjust the image settings per channel/camera.
• Press the DOWN button to select DECODER SETUP and press the MENU button to confirm.
• Press the + and - buttons to adjust the value. Press the DOWN button to select the next position or
the UP button to return to the previous position.
• Press the ESC button to return to the main menu.
MENU:
TITLE SETUP
DATE/TIME
DECODER SETUP
SENSITIVITY
EVENT LIST
AUTO SEQUENCE
OTHER
ENTER: MENU KEY
EXIT: ESC KEY
CONTRAST:
00 CONTRAST:
00
BRIGHTNESS: 00 BRIGHTNESS: 00
SATURATION: 00 SATURATION: 00
HUE:
00 HUE:
00
CONTRAST:
00 CONTRAST:
00
BRIGHTNESS: 00 BRIGHTNESS: 00
SATURATION: 00 SATURATION: 00
HUE:
00 HUE:
00
4) SENSITIVITY:
The SENSITIVITY function sets the sensitivity of the motion detector. Set each channel/camera
between detection levels 1 and 7 or OFF. Level 7 sets the system to the highest sensitivity level for
motion detection. The monitor will give a short acoustic alarm when motion is detected.
• Press the DOWN button to select SENSITIVITY and press the MENU button to confirm.
• Press the + and - buttons to adjust the sensitivity. Press the DOWN button to select the next
channel/camera or the UP button to return to the previous channel/camera.
• Press the ESC button to return to the main menu.
MENU:
TITLE SETUP
DATE/TIME
DECODER SETUP
SENSITIVITY
EVENT LIST
AUTO SEQUENCE
OTHER
ENTER: MENU KEY
EXIT: ESC KEY
SENSITIVITY:
CH1
:
OFF
CH2
:
OFF
CH3
:
OFF
CH4
:
OFF
EXIT: ESC KEY