König Electronic SAT-MOD5, Manual

Page: 3 / 60

ENGLISH
The König stereo SAT-MOD5 UHF PLL Modulator with remote control extension
system distributes the video and audio signal from any source to all the TV-sets of
the house while operating these sources by remote control from any room. The SAT-
MOD5 is especially useful for digital satellite receivers and DVD-players without
internal modulator.
Step 1: Turn on the modulator after connecting the peripherals and remote control
extension system. Install the Infrared transmitter nearby the equipment you want to
control. Optimize the position of the remote transmitter LEDs for best results.
Step 2: Choose the output channel at a free RF channel at your antenna installation.
Press the SET key for 2 seconds, until LED starts blinking. Now press the “
s
“ or
“
t
“ key until you reach the selected channel. The LED stops blinking after about 2
seconds, and the selected channel adjusted.
Step 3: Install the receiver in the room where you want to use it. Optimize the position
of the remote eye for best results.
2