To stop the countdown:
During counting press the “TIMER” button to pause the counting.
Press “SET” to restore to the default time. Or press “UP” to set the time
to 00:00:00.
To set count down time:
Press “SET” button and the hour digits will flash.
Use “UP” and “DOWN” buttons to adjust the hour and press “SET” to
confirm.
Adjust the minute and the second accordingly.
ALARM OPERATION
To set the alarm time:
1) Press “MODE” button until “ALARM” is show in the display.
2) Press “SET” and the hour digits will flash. Use “UP” and “DOWN”
buttons to adjust it and press “SET” to confirm.
3) Change the minute, the length of the snooze period and the alarm
melody accordingly.
To turn on/off the alarm and the snooze function:
In “time mode”, press “MODE” button to enter the “alarm mode”. Press
“SNOOZE”/”UP”/”DOWN” to turn on/off the alarm with/without the
snooze function. Respective icon must be shown correctly.
At pre-set alarm time with only the alarm function being switched on, the
unit will ring for one minute. Or you could stop the ringing by press any
button.
At pre-set alarm time with the alarm and the snooze functions being
switched on, the unit will ring for one minute and then ring again after
the pre-set time period of snooze (“Snooze” icon flashes). This will
repeat twice.
Or you could stop the whole ringing process by press the “SET” button
during the ringing.
THERMOMETER
Temperature in Celsius or in Fahrenheit can be changed by pressing
the “C/F” (“DOWN”) button or the “SNOOZE LIGHT” button.
The temperature range is: 0°C-50°C (32°F-122°F).
