26773 Table monitor stand
26773
»Z-Stand«
Information for use
Intended use
The table monitor stand is designed for loudspeakers and monitors. The four rubber pads on the
upper and lower parts ensure a secure stand. Furthermore, a decoupling between loudspeaker,
stand and table is achieved. The table stand is construed for a load-bearing capacity of 15 kg.
Foreseeable misapplication
The table stand should not be loaded beyond its specified load-bearing capacity.
General
u
The stand should be placed on a level and stable surface.
u
The user should be physically fit and technically competent.
u
Place the speaker in the center of the stand, otherwise there is an increased risk of tipping.
u
Personal injury and property damage may arise if the monitor stand should fall.
u
The usage information is an integral part of the product and must be kept for its service life
u
or passed on to any subsequent owner or user.
Warranty
No warranty is given for damage caused by:
u
Non-observance of the usage information and the "General safety and assembly instructions".
u
Unsuitable or improper use.
u
Incorrect installation or commissioning by the buyer or third parties.
u
Natural wear and tear.
u
Careless handling.
u
Improper modifications or repair work by the buyer and third parties.
u
Impact on components of foreign origin.
u
Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manu-
facturer's approval.
Technical data
Material
Table monitor stand: Steel, powder-coated.
Rubber pad: rubber, black.
Load capacity
15 kg
Dimensions
Bearing plate: 180 x 150 mm
Base: 195 x 214 mm
Height: 253 mm
Packing
265 x 265 x 275 mm
Weight
3 kg per stand
