Stacker 18952
for Keyboard Stand 18950; adjustable height and angle
Made in Germany
-18952.000.55-
-03.80.792.00- 6/03
1
2
3
4
5
6
7
7
9
10
11
12
10
8
Assembly Instructions
Important:
The two attachments can be
mounted at eight different heights, but for
safety reasons they always have to be set
with the same height.
Remove the rear plastic plugs
3
from the
support tubes
2
of the keyboard stand.
Use locking screw
5
to fasten main
tube
6
to cross-bar
4
. The height is adjustable
for eight settings: Support arm from a min. of
100 mm to a max. of 400 mm above the
keyboard stand.
Insert cross-bar
4
as far as it will go into the
support tube
2
of the keyboard stand and lock it
with knurled-head screw
1
.
Fasten support arm
9
in the desired position on
the main tube
6
using hexagon socket-head
bolt
11
, locking disk
7
and spring
8
with
hexagon socket wrench
12
.
Adjust the rubber sleeves
10
for the instrument.
