SAFETY INSTRUCTIONS
MOUNTING INSTRUCTIONS
The mounting of the 21467 is easy to handle
1
screw-in both locking knobs
2
loosen the locking knob on the base clamp
3
spread legs apart to max. base width
4
braces should come into a horizontal position
5
tighten locking knob
5
NOTE:
5
Do not over tighten the locking knobs.
5
This will result in undue stress to the fitting.
5
Just enough to hold the extensions position firmly.
SPECIFICATIONS
Thank you for choosing this product. This instruction manual informs you about the important steps to set up and
handle the product. We recommend to keep the manual in a place for a possible later use.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21467-000-55 Rev.06 03-80-241-00 5/15
- Max. centric load: 50 kg
- Before and after use check stand for damage.
-
Damaged Stands may not be used.
- Before use:
-
- check the functional capability of:
- -
K&M-stand, speakers and tools concerning:
- -
completeness, integrity, usability
-
- choose only trained installers (2 persons with
- -
professional and physical qualification)
- Optimal stability conditions:
-
- use only on even and stable surface
-
- avoid off-center loading
-
- set up brace
4
in horizontal position
- Safety in operation:
-
- unauthorized persons should keep distance to
- -
protect from stumble and tilting
-
- inspect bolted assemblies regularly
-
- always insert the safety pin (14) after positioning
- -
of the speaker
-
- do not push and pull the loaded stand on the floor;
- -
it can cause damages on the base
- Safety in maintaining and removing
-
- first remove load
-
- pay attention to possible hazards
- -
(squeezing, hurting) by collapsing
Material
basic rod, leg rods: aluminum
expandable rod, braces, locking pin: steel
clamps: zinc die-cast
Parquet protector, shock absorber: TPE
ring lock: aluminum
mandrel elements: Polyamide (PA)
max. Load
max. 50 kg centric load
Dimensions
max. footprint: diameter 1320 mm
height: 1370 - 2160 mm (max. footprint)
expanding mandrel system: ø 35-36,5 mm
Collapsed, kg
1160 x 145 x 126 mm, 4.6 kg
Card box, kg
1185 x 130 x 120 mm, 5.3 kg
Accessoires
(optional)
Carrying Case 21311 or 21312 (for two 21467)
Flange Adaptor (z.B. 19580, 19654,
19656 etc.)
Screw-on Adaptor (24281)
Adapter Sleeve 21326: ø 38 mm (=US-Variante)
Warning Strip "CAUTION" 21402
21467 Speaker Stand
»Ring Lock«
- Load capacity: 50 kg
- A patented expanding mandrel system provides a tight an firm fit for the speaker
- Professional, solid, transportable
- similarly adapted for home, property, public area
- Height; min. 1370 mm / max. 2160 mm, foot circle: 1320 mm
- Expanding mandrel system: ø 35-36,5 mm, weight: 4,6 kg
