PLACING INSTRUMENTS
USER INSTRUCTIONS
CONTROL, MAINTENANCE, CLEANING
- For maintenance work, pay attention to possible hazards (squeezing, hurting).
- For cleaning it is recommended to use a slightly damp cloth and non-abrasive
-
cleaner.
FAULT FINDING (F) and REPAIR (R)
F: stand wobbles B: check floor
B: push stand down, frames make a small adjustment possible.
F: rack "moves"
B: Check whether the rack is correctly in position
B:
(click sound, see
2
).
F: inclining guitar B: Straighten the guitar, select the correct holder and recess
B:
(see
10
)
10
NOTE: each body holder is
10
aligned with a neck holder.
11
Do not position the guitars at a slant!
12
The guitars may be positioned
12
facing the right or the left.
12
The strings will not be touched
12
If the guitar is carefully placed
12
holding the back of the neck.
13
Then position the guitar body in the
13
stand...
14
...then the back of the guitar neck
14
in the corresponding holder.
TECHNICAL DATAS
Materials
feet - PA with fiber
cushions - TP-elastomer
frames, bolting assemblies - steel, alu
Capacity
max. 5 electric guitars and 10 picks
Dimensions
B x T x H 688 x 335 x 700 mm
Packed size
B x T x H 688 x 173 x 670 mm
Carton
B x T x H 700 x 175 x 670 mm
Weight
net 4.7 kg; gross 5.8 kg
Your guitars are in very good hands with the »Guardian«!
7
The upholstered elements provide protection for your guitar
8
The protective racks prevent knocking
9
Recesses in the support rack position the guitars and prevent turning
NOTE:
We use high quality materials – to protect the guitar. The "softness" of some paints, especially those with a cellulose nitrate base
means pressure marks may appear on the instrument due to the force of gravity, but these are minimal and compared to normal wear
and tear insignificant.
PICK HOLDERS:
There are 5 x 2 integrated pick holders
behind the neck rack. We recommend
removing the plectra before folding and
transporting the stand.
cavity for
e-guitar (5x)
contact
elements (5x)
protective bars (6x)
