Loss of stability
Injuries are possible due to tipping.
u
Set up the stand on level ground
u
Extend the legs as far as they will go
u
Tighten the clamping screws
u
Ensure an even (centric) weight distribution of the load
u
Hold the stand firmly when operating the crank handle
WARNING
Crushing points
Injuries to the fingers possible.
u
Always grasp the crank with the whole hand during cranking movements
u
Wear suitable protective gloves if necessary
CAUTION
Obstacles in the range of motion
Possible injuries due to tripping.
u
Work in a safety-conscious manner
u
Close off movement area for unauthorized persons
CAUTION
It is mandatory to carry out a visual and functional check of the stand before each use.
u
Check the stand for safe operating condition and function
u
Check the stand for damage and wear
u
Observe special ambient conditions
NOTE
Operation
Set up stand
1.) Loosen the clamping screw of the base clamp.
2.) Extend the legs as far as they will go.
3.) Tighten the clamping screw.
Folding the stand
✓
No load is mounted on the stand.
✓
The stand tube is in the lower end position.
1.) Loosen the clamping screw of the base clamp.
2.) Fold the legs completely.
3.) Tighten the clamping screw.
21
