3. PLACE RUBBER PROTECTIVE DISKS
4. PLACEMENT and ATTACHING the LOUDSPEAKER
A strip with four self-adhesive rubber protective disks
(ø13mm) are provided with the Loudspeaker Mount.
7
Depending on the dimensions of the box these are
7
placed on the adjustable tray.
Technicians: FIRST PERSON holds the loudspeaker securely, while the ...SECOND PERSON: adjusts and attaches the loudspeaker to the tray
1
8
Adjust the knurled screws such that both threads
12
Adjust the loudspeaker so that it touches the
14
...underneath the tray.
18
stick out at least 2 mm from the square nuts.
12
front lip and leave some space in the back.
15
Center the loudspeaker as best as possible and...
1
9
Both knurled screws can be move from side to side.
13
Tighten the wing nuts and correct the positioning
16
...secure it by tightening the knurled screw...
19
The distance (78-152 mm) is determined by
13
of the adjustment tray...
17
...and press it toward the front lip of the tray.
19
the characteristics of the loudspeaker.
18
NOTE: The clamp must be at least 10 mm
10
Place the wing nuts in the approximate position on the tray
18
inside the loudspeaker housing.
11
...and adjustment tray.
5. ADJUSTMENT and READJUSMENT of ANGLE AND DIRECTION
(after adjustment has been completed ALWAYS follow Item
24
)
5.1 ANGLE
a. The angle of the tray
a.
can be adjusted variably
a.
from +3° to -20°.
b. The loudspeaker stays on the tray.
c. The adjustment screw
20
can only be turned
c.
if the loudspeaker is being held
c.
so there is not torque on the screw
Technicians:
FIRST PERSON
- carries and holds the loudspeaker
-
together with the tray
SECOND PERSON
- screws in the adjustment screw
20
19
Lift up the loudspeaker with the tray
20
Turn the adjustment screw to the approximate position
21
Carefully place the weight of the loudspeaker on the tray until it lines up with the adjustment screw
21
Repeat
19
-
21
if needed until the desired angle has been set.
5.2 DIRECTION
The swivel area of the tray is up to +/-50°
22
The swivel axis adjustment is stiff. The screw connection
22
does not need to be loosened.
23
Grab the loudspeaker and
23
the tray and swivel it in
23
the desired direction.
24
After each adjustment (Angle, Direction) of the
24
loudspeaker, check both clamp nut and knurled screws
24
to ensure that they are securely in place.
Side
view
View
from top
