WALL MOUNT
19730 iPad wall mount
- Safe and effective – the new wall mount has your iPad firmly in hand!
- Flexible and break-proof cradle.
- Quick and safe iPad click-in.
- All connections to the iPad are accessible.
- Can be turned 360° - for any position between horizontal and vertical.
- Easy to turn with slip prevention.
SAFETY INSTRUCTIONS
- Clip the iPad carefully into the cradle and check it is held correctly - handle the holder carefully when turning.
- The holder is attached to the wall with 3 screws. NOTE:
-
a. Unsuitable walls are weak walls or walls through which electricity cables or water pipes are laid. Consult a qualified technician if
- a.
necessary.
-
b. Use screws, rawlplugs, etc. (not included in the delivery) which are suitable for the type of wall (wood, concrete, brick, etc).
-
c. When you have finished attaching the mount to the wall, check that the screws and nuts are tightly fastened and check them at
- c.
regular intervals.
Thank you for choosing this product. This instruction manual informs you about the important steps to set up an handle the product.
We recommend to keep the manual in a separate place for a possible later use.
Material
Wall mount, holder: polyamide (PA-6)
Screws, nuts, discs, springs: steel
Max. load
iPad 1. Generation (750 g)
Size
base dimensions : 253.7 x 40 x 195.4 mm
card box: 300 x 102 x 230 mm
Weight
net 0.32 kg, gross 0.62 kg
USER GUIDE
(FF) FAULT FINDING and (R) REPAIR
FF: Holder wobbles
FF:
R: Check tightness of the wall screws
FF:
R: Check the connection between the wall disc and cradle
FF: iPad is not held correctly
FF:
R: Place the iPad in the cradle correctly while listening for
FF: R:
the audible click in place
7
FF:
R: NOTE! Not suitable for iPad 2. or 3. Generation
The wall mount is pre-assembled and
can be attached “as is” to the wall.
1
Decide where the drill holes in
1
the round disc are going to be:
1
- either so they are optically
1
-
suitable or suit the practical
1
-
conditions
2
Mark the drill holes
3
Drill the holes for the rawlplugs
3
- ø 6 mm for plastic rawlplugs
3
- ø 3 mm for wood screws, if required
4
Attaching to a stone wall
5
Attaching to a wood wall
For porous concrete, plaster board, etc.
we recommend asking for suitable
fasteners at your local DIY or hardware
store.
TECHNICAL DATA
6
Place the iPAD wide-side-first into the
6
two holding elements and then
7
clip into the opposite holding elements.
POSITION
8
The holder can be turned 360°.
8
The iPad can be positioned
8
horizontally, vertically or diagonally or
8
in any other position without having to
8
remove the iPad from the holder.
Stone, concrete
Wood
