TECHNICAL DATA
4. SETTINGS
4.1
LOAD CAPACITY
4.1
The load capacity of up to 2.8 kg is based on
4.1
a frictional connection between the base and
4.1
extension tubes. This tenacity is due to the design
4.1
and cannot be changed. Make sure that the surfaces
4.1
on the extension tube are clean and free of grease.
4.2
HEIGHT ADJUSTMENT
4.2
The extension tube is stepless height adjustable.
4.2.1
Grip both tubes and push the extension tube
4.2.1
in or out of the base tube.
4.3
TILTING of the MUSIC DESK
4.3.1
Hold the desk with one hand and…
4.3.2
…loosen the clamping nut with the other.
4.3.3
Now tilt the desk as desired and…
4.3.4
…tighten the clamping nut again.
5. DIMENSIONS
5.1
Support height at 45°: 740-1280 mm, stepless variable
5.2
Safety projection: 25 mm
5.3
Total height: min. 970 mm, max. 1550 mm
5.4
Stacking distance: 70 mm
5.5
Root circle diameter: ø 535 mm, Höhe 160 mm
5.6
Music desk
5.6.1
Angle of inclination: 0° to +85° (use)
-90° (transport)
5.6.2
Support (depth): 11912 (Steel plate): 55 mm
11913 (PC plate): 40 mm,
additionally with depot for pens
5.6.3
Music desk (W x H): 500 x 320 mm
5.7
Tube diameter: ø 25 mm, ø 20 mm
3. MOUNTING the SOCKET to the BASE TUBE
3.3
Connect the SOCKET to the BASE TUBE
3.3.1
Push the socket onto the base tube as far as it will go.
CHECK, MAINTENANCE
- During maintenance work, pay attention to possible
-
hazards (jamming, tilting, bumping...)
- Check regularly that:
-
a. components are in good condition (defective parts
-
a.
must be replaced or repaired)
-
b. stand is set up correctly (see
2
and
3
)
-
c. tightness of all screw connections
- Use a slightly damp cloth and a non-abrasive
-
cleaning agent to clean the screw connections
FAULT-FINDING (F) and REPAIR (R)
F. Stand wobbles R: Check the base
R: Tighten the central base screw
6.1
F: Single foot R: Tighten the Phillips screw
F:
wobbles
R:
on the foot tube
6.2
F: Plate retracts R: Overweight load?
F:
unintentionally R: Put on the load as gently as possible
R: Clean the pull-out tube if necessary
R: Defective pre-setting?
3.4
DISMANTLING is carried out in reverse order.
3.3.2
Turn the socket until the webs on the
3.3.2
socket bottom engage in the notches
3.3.2
of the base tube (= 0 mm)
3.3.3
Now screw the socket firmly to the base tube using
3.3.3
the Allen screw
b.1
. Use Allen key
b.3
for this.
Material
Music desks: 11912: Steel, powder-coated, black
Music desks
:
11913: Polycarbonate (PC), black
Tubes: Steel, powder-coated, black
Connecting elements: Steel, galvanised
Socket, cover, half-shells: PA
Parquet protectors: TPE
Load
Sheets, booklets, folders etc., max. 2.8 kg
Dimensions
Root circle diameter 535 mm,
Height of music desk (at 45°): 740 – 1280 mm
Music desk (B x H): 500 x 320 mm
Packing
Cardboard inside: 801 x 532 x 161 mm
Weight
11912 (steel desk): 3.0 kg, 11913 (Polycarbonat desk): 2.2 kg
Accessories
(optional)
Carrying case 11450-000-00
Music trays 12211, 12218, 13100
4. SETTINGS
5. DIMENSIONS
FAULT-FINDING and REPAIR
LOAD CAPACITY
MUSIC STAND: SETTINGS
Position of use
= 0º to 85º
Transport
position
= minus 90º
not suitable
for use)
HEIGHT
ADJUSTMENT
TILTING
Nr. 11912
Nr. 11913
