To change the security code of the PIR sensor:
1. Open the back plate of the PIR sensor.
2. Locate the switch in the battery compartment
(see figure A).
3. Set the switch in desired position.
4. Close the back plate.
To change the security code of the alarm:
1. Open the back plate of the alarm.
2. Locate the switch in the battery compartment
(see figure B).
3. Set the switch in desired position.
4. Close the back plate.
It’s important to select the same code settings on the PIR sensor
and alarm in order to establish correct communication
Remark:
if the LED indicator is constantly on, it means that the
batteries need to be replaced.
Warning:
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician if service is required. Do not
expose the product to water of moisture.
Warranty:
No guarantee or liability can be accepted for any changes and
modifications of the product or damage caused due to incorrect use
of this product.
General:
Designs and specifications are subject to change without notice.
www.konigsecurity.info
