König SAS-ALARM240, User Manual, Page: 4 / 80

44
English
Settings and queries
The settings and queries can be carried out using the remote control or the control panel.
Settings
• To enter the setting mode, press the setup button on the control panel.
• To change the settings, press [#] + [code] + para [#].
• To exit the setting mode, press [*] + [#].
Setting Command Remarks
Record voice message [#] + [19] + m [#] Voice message duration: max. 10 seconds.
Add remote control [#] + [07] + [xxx] + [#]
[xxx] = remote control ID (001-120). After adding, press a button on the remote control.
2 beeps = remote control added succesfully. 1 beep = remote control already configured.
Max. number of remote controls: 120.
Delete remote control [#] + [08] + [xxx] + [#] [xxx] = value of remote control to be removed.
Delete all remote controls [#] + [08] + [***] + [#] [***] = all connected remote controls.
Add detector [#] + [09] + [xxx] + [#] [xxx] = detector ID (001-120). Max. number of detectors: 120.
Delete detector [#] + [10] + [xxx] + [#] [xxx] = value of detector to be removed.
Delete all detectors [#] + [10] + [***] + [#] [***] = all connected detectors.
Set up phone number(s) [#] + [3] + [y] + phone [ * #]
[y] = phone number ID (1-9).
ID 1-6 = regular phone numbers. ID 7-9 = emergency phone numbers.
Delete phone number(s) [#] + [3] + [y] + [#] [y] = phone number ID (1-9).
Setup password [#] + [50] + pa [#] The password has a maximum of 4 digits. Default password: 1234.
Setup arming delay time [#] + [51] + s [#] Seconds from 00 to 99. Default = 00.
Setup alarm delay time [#] + [52] + s [#] Seconds from 00 to 99. Default = 60.
Setup siren time [#] + [53] + m [#] Minutes from 00 to 20. Default = 01.
Setup date and time
[#] + [56] + year + month + day +
hour + m s [#]
Example: “20141025183500” = October 25, 2014 18:35:00.
Setup alarm clock
[#] + [57] + [yy] + start time + end
time + day(s) + [#]
[yy] = 05 / 06 (max. 2 alarms).
Example 1: “050900090112345” = siren sounds for 1 minute on weekdays at 09.00.
Example 2: “051030103167” = siren sounds for 1 minute during weekends at 10:30.
Delete alarm clock [#] + [57] + [yy] + [0] + [#] [yy] = 05 / 06.
Setup remote control by
telephone
[#] + [62] + [y] + [#] [y] = 0 (off) or 1 (on). Default = 1 (on).
Setup number of rings for
remote control by telephone
[#] + [18] + [yy] + [#] [yy] = 00 (off) - 99. Default = 8.
Setup audible feedback [#] + [11] + [y] + [#] [y] = 0 (off) or 1 (on). Default = 1 (on).
Volume audible feedback [#] + [79] + [y] + [#] [y] = 0 (off) - 7 (loud).
Display brightness control [#] + [83] + [y] + [#] [y] = 0 (dark) - 7 (bright).
Set up power-saving mode [#] + [84] + [y] + [#] [y] = 0 (off) or 1 (on). Default = 1 (on).
Volume built-in siren [#] + [87] + [y] + [#] [y] = 0 (off) - 7 (loud).
Setup display light flashing [#] + [88] + [y] + [#] [y] = 0 (off) or 1 (on). Default = 0 (off).
Setup telephone line connection
detection
[#] + [13] + [y] + [#] [y] = 0 (off) or 1 (on). Default = 0 (off).
Disable use of remote control for
arming/disarming
[#] + [15] + [y] + [#] [y] = 0 (off) or 1 (on). Default = 0 (off).
Setup interference prompts [#] + [16] + [y] + [#]
If other devices try to connect to the alarm system, the siren will sound for 5 seconds.
[y] = 0 (off) or 1 (on). Default = 0 (off).
Setup control panel lock [#] + [17] + [y] + [#] [y] = 0 (off) or 1 (on). Default = 0 (off).
Add wireless strobe siren
(option)
Press the “SET” button on the strobe
siren to enter start code learning.
Press the disarm button on the
control panel. The strobe siren beeps
once to indicate that the learning
process is completed successfully.
Contact your local reseller for availability.
Volume external siren
(option)
[#] + [14] + [yy] + [#] [yy] = 00 (off) - 99 (loud).
Restore factory settings for
control panel
[#] + [9898] + [#]
System reset [#] + [989801] + [#]+ [#]+ [#] Caution: The entire alarm system is restored to the factory settings.