4
Instructions for Use
1. Battery
Installation
In order to guarantee the normal running of the appliance, please replace the battery in time in case
of battery power shortage as per the steps below:
Hold the body with the left hand and the battery cover with the right hand; turn in counter clockwise
direction and open it; Take out the two alkaline dry batteries (2*CUM-2) 3V;
Install two new batteries in the corresponding position of the battery jar (Pay attention to the positive
and negative electrode, the end with the spring is the negative electrode);
Replace the battery cover and turn it fi rmly in clockwise direction; Press the power button, if the
light is turned on, the installation succeeds and it can be used normally; otherwise, you need to
reinstall the battery.
Humidifi cation Mode: Put the special sponge fi lter in the container and pour the water in the
container.
In order to guarantee that the appliance can emit the fresh air, please change the water in time as
per the operations as follows:
3. Humidifi cation Mode (See Fig. 3) ---------Change water
Hold the bottom cover with the left hand and the body with the right hand; turn in counter clockwise
direction and open it; Take up the body with the right hand and put aside; Take out the sponge in
the container, clean and dry it; then put back in the container; Pour the water in the container (not
surpass 2/3 of the container);
Replace the body and turn it fi rmly in clockwise direction.
Air after
humidifi cation
Sponge Filter
Fan
Dry Air
(Fig 3)
Water
Body
Container
Filter
Water
Water
Until 2/3 of the
container
Summary of Contents for HC-AH10
Page 68: ...68...