Switching from digital to analog modes:
A)
Analog Mode
-When the mode LED is on, the wireless Steering wheel is in analog mode.
Games that are Vibration Function Compatible will only vibrate if the Wheel is in analog
mode.
B)
Digital Mode
-When the mode LED is off, the wireless Steering wheel is in digital mode,
and the analog function is disabled. This is the standard mode for PSoneTMand
PlayStation®.
Directional Pad
The D-pad controls the direction in which objects moves. It is also used for navigating menus
and is the preferred control for precision in direction when using the program function.
Action Buttons
These buttons are used to perform various actions, depending on the game. For more details,
see the game’s instruction manual.
Start Button
This button is generally used to make selections in the menu and for starting or pausing the
game. For more details, see the game’s instruction manual.
Select Button
This is a standard button that allows you to do various things, depending on the game. For more
details, see the game’s instruction manual.
Mode Button
The Wireless steering wheel has two different modes, analog and digital mode. The red LED
light will be on when the wireless steering wheel is in analog mode, and off when the Wheel is in
digital mode.
Macro Button
This button allows you to relocate buttons. See the ”Macro Function” section of this instruction
manual.
Sleep and wake up:
This product will automatically enter sleep mode after 5 minutes of non-use in order to
extend the battery life.
To exit sleep mode (wake up), please press the <start> button.
The wireless receiver’s orange LED will glow to indicate the connection has been re-made.
Macro Function
How to relocate the Wireless Steering Wheel:
Press the
MACRO button
until the green
LED
lights to indicate that the programming function is
active.
Select the button (
, L1, L2, R1, R2, up, down, left, down, Brake Pedal, Accelerate
Pedal ) to be programmed by pressing that button until the green
LED
flashes.
Press the desired button(s) to be programmed into the selected button above.
The green
LED
will be extinguished; the desired button assignments are finished.
Repeat the procedures above to program another button.
To reset the Universal Wireless Wheel back to its default setting:
1.
Press the
Macro Button
to turn on the programming function. The green
LED
will be light
on to indicate that the programming function is active.
2.
Press the button you wish to reset, the green
LED
lights.
3.
Press the button you wish to reset again, the green
LED
will turn off.
DECLARATION OF CONFIRMITY
We declare under our responsibility that the product;
Brand name:
KÖNIG
Model:
GAME-WHEEL30
Description:
RF 2.4Ghz wireless gamewheel
Is in conformity with the following standards;
EN 300 440-2 V1.4.1 (2001-09)
EN 301 489-1/-3 V1.4.1 (2002-08)
EN 60950-1 (2001)
Following the provisions of the 1999/5/EC R&TTE Directive.
Conform this regulation it’s allowed to use this product in
all European Community & EFTA countries.
Nedis BV is not responsible for the use of this product outside
the European Community & EFTA countries.
WARNING
:
To reduce risk of electric shock, this product should ONLY be opened by an authorized
technician if service is required. Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water of moisture.
WARRANTY:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
GENERAL:
Designs and specifications are subject to change without a notice.
GameCube® is a registered trademark of Nintendo. This product is not sponsored, endorsed or
approved by Nintendo.
PSone
TM
PlayStation® and PlayStation®2 are registered trademarks of Sony. This product is
not sponsored, endorsed or approved by Sony.
Xbox® is a registered trademark of Microsoft. This product is not sponsored, endorsed or
approved by Microsoft.
EN
EN