König CMP-WNUSB21, Manual, Page: 3 / 88

3
The current status of the wireless connection will be displayed by the Ralink
configuration utility in icons:
Wireless connection is established, good signal reception.
Wireless connection is established, normal signal reception.
Wireless connection is established, weak signal reception.
Connection is not established yet.
Wireless network card is not detected.
There are two ways you can configure your wireless network card to connect to a
wireless access point:
1. Using the Ralink configuration utility
2. Using the built-in Windows Zero configuration utility
Using Ralink Utility
Please follow the instructions below to use the Ralink configuration utility to connect to
a wireless access point.
1. Right-click the Ralink configuration utility icon located in the lower-right corner of
your computer desktop and then click ‘Launch Config Utility’.
Ralink setup utility (RaUI) will launch, and begin to scan for all wireless access
points automatically.
Menu
Setup
Area
More
/ Less
button