- Careful use of the stand maintains the use of the telescope and the load bearing functionality of the stand, as well as the safety of the installation
- Perform workstation maintenance only without the microphone attached and watch for possible risks (pinched hands/fingers, impact
-
or the stand falls over)
- To care for the product use a damp cloth and a non-abrasive cleaning agent
FAULT-FINDING (F) and REPAIR (R)
F: Stand is not stable
R: Ensure that the surface is even, tighten the clamping screw
F: The extension tube is not stable
R: Tighten the clamping bracket and the locking ring
F: The extension tube retracts with a product attached to it R: Check the load (max 12 kg) and tighten the clamp screws
F: Stand lilts to one side
R: Ensure that the surface is even
B: Balance the boom arm and ensure the load is placed over a leg/foot
USAGE NOTES / FUNCTION
CHECK, MAINTENANCE, CLEANING
A. BOOM ARM K&M 21231
5
Connect the female threaded bolt
5
(1/2") of the arm with the male
5
bolt (1/2) of the stand and screw
5
it in as far as it will go.
6
Detailed information on the
6
extendable boom arm is available
6
in the K&M-21231 operating
6
instructions.
B. K&M MICROPHONE CLIPS
B.
85035 - ø 17-22 mm
B.
85050 - ø 22-28 mm
B.
85055 - ø 28-34 mm
B.
85060 - ø 34-40 mm
B.
8507,0 - ø 34-40 mm
7
The Microphone Clips each have
7
3/8" and 5/8"-connector threading.
7
To mount 21411 use the following
7
Reducer thread adapters:
7
K&M 215 for 5/8"-microphone clips
7
K&M 218 for 3/8"-microphone clips
e.g.: K&M-85050
K&M 215
(1/2"-5/8")
K&M 21231
K&M 218
(1/2"-3/8")
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21411-400-55 Rev.09 03-80-704-00 7/15
MOUNT THE MICROPHONE (with K&M-Accessories- not provided with the delivery)
STAND HEIGHT ADJUSTMENT
NOTE:
1
8
Prior to loosening the clamp screw hold the
18
extension tube in one hand
1
9
Loosen the clamping screw of the
19
clamp/bracket
10
Adjust the extension tube to the desired
10
height and tighten the clamping screw
9
11
Loosen the clamp/bracket of the locking ring
12
Place the locking ring on the clamping
12
bracket; tighten the clamping screw
11
The stand is retracted
in the reverse order.
TECHNISCHE DATEN / SPEZIFIKATIONEN
Material
- Tubes, threaded bolts: Steel
- Brackets: Polyamid (PA)
- End caps: TPE
- Connection elements: Steel galvanized
Dimensions
- Height: 1430-2380 mm
- Base circumference: ø 1240 mm
Packaging
Weight
W x D x H: 100 x 90 x 1170 mm
5 kg
Box
Weight
W x D x H: 130 x 120 x 1185 mm
5.7 kg
Accessories
(optional)
- Boom arm 21231
- Thread adapter 215, 218
- Microphone clips 85035, 85050, 85055, 85060
- Carry case 21311