E-5
16. Pull the left rail out completely from the finisher.
17. Hold the area of the saddle unit shown in the illustration with one of your hands and lift it. Hold the left rail
with your other hand. Fasten the saddle unit to the left rail by fitting the tab on the rail into the slot located
on the rear side of the saddle unit and then the other tab into the slot on the front side by slightly bending
the front side of the rail.
Note:
• Make sure that the guide plate described in step 11 is opened.
• Put the saddle unit close to the rail and move the saddle unit parallel to the rail. Be careful so that the
saddle unit does not come into contact with the finisher in the area A.
• When fitting the tabs on the rail into the slots, be careful not to slide the rail back into the finisher.
Caution:
• Be careful not to drop the saddle unit or hurt your fingers by the rails.
• When fastening the saddle unit to the rail, be careful not to topple the finisher.
A3ERIXC021DA
A
Front
Rear
