E-3
6. Remove the upper cover (large).
7. Install two of the screws that were removed at
step 4 at the locations as shown in the illustration.
Note:
Do not use the screw
➂
.
8. Attach the cover furnished with the post inserter
(two screws C furnished with the post inserter).
9. Install two positioning screws furnished with the
post inserter at the locations as shown in the illus-
tration.
10. Install the post inserter to the finisher.
Note:
Place the post inserter in a location where the
positioning screw is fit into the hole as shown in
the illustration. Then slide the post inserter in the
direction of the arrow.
11. Connect the post inserter’s two connectors to
the finisher’s connectors.
A10AIXC004DA
A10AIXC006DA
A10AIXC007DA
A10AIXC008DA
A07VIXC013DA
A10AIXC010DA
