Konica Minolta PF-210, Service Manual

Page: 21 / 38

D-11
13. Perform another test print and check the reference deviation.
14. Repeat the adjustment until the reference line falls within the specified range.
6. Touch the 3rd Drawer or 4th Drawer key.
7. Press the Start key.
4348P016CA
8. Measure the width of printed reference line B.
Specification: 11.3 mm±1.5 mm
9. If width B falls within the specified range, finish
the adjustment procedure.
If outside the specified range, perform the adjust-
ment below.
4030S512AA
B
10. Touch END to display the Registration (FD)
screen.
11. Touch the 3rd Drawer or 4th Drawer key.
4348D519CA
12. Press the Clear key and use the 10-Key Pad to
set the value.
✽
If width B is wider than the specified range, enter a
negative value.
✽
If width B is narrower than the specified range,
enter a positive value.
Adjustment range: + 4.0 max. and -4.0 min.
4349D519CA
D.fm Page 11 Tuesday, September 2, 2003 8:38 AM